Product Center
JM30 servo motor encoder wire welded base 7P small inclined port
| Item No | 6353-07BS1NA03 |
| Type | servo motor encoder |
| Order of units | 7Pin |
| Interval | 5.0mm |
| Rated current | 1.0A |
| Rated voltage | 100VC |
| Installation method | Wiring type |
Overview
Engineering Data
Product Certification
Engineering Drawing
Download
servo motor encoder
The servo waterproof plug connector is a type of connector with high reliability and high protection level. It is mainly used in industrial machinery and equipment, especially in situations involving harsh environments such as liquids, gases, and dust. This connector has the characteristics of convenient insertion and removal, stable signal transmission, and good sealing performance, which can ensure the long-term stable operation of the equipment and avoid equipment failures caused by connector failure.
Underlying parameter
| Item No | 6312M-06DXXMA0X |
| Type | IEEE 1394 connector |
| Order of units | 7Pin |
| Interval | 5.0mm |
| Cztegory | male |
| Installation method | Wiring type |
Engineering parameters
| Rated Current | 1.0A/40V | AMP |
| Contact Resistance | 10 | mΩ Max |
| Withstand Voltage | 200 | AC / DC |
| Insulation Resistance | 1000 | mΩ Min |
| Operating Temperature | -40 to 105 | ° C |
| Contact Material | Phosphor Bronze | |
| Contact Plating | Gold | |
| Insulator Material | Polyester(UL94-0) | |
| Housing | LCP | |
| Max. Processing Temp. | 260℃ for 30-60 seconds;260℃ for 10 seconds |
